Read the plans once. Check every cabinet before you quote.
4 steps
Plans to sign-off
One tap
Per question
Revisions
Compared for you
You
Sign off every list
Five steps. Every job follows the same path.
The plans come in, CabinetryOS reads them, you check the reading, the builder answers what’s missing, and you sign off a list you trust.
01
Plans
Load the architectural PDF set, including any revisions, for the job you’re quoting or building.
02
Reading
Every elevation is read into cabinets, panels, fillers, kickers, bulkheads and appliances, sized to your shop profile.
03
Check
Each item sits beside its sheet. Scale and measure to confirm sizes, and fix anything that’s off.
04
Questions
Missing finishes, hardware and site details become one-tap questions, sent to the builder by secure link or printed on a sheet.
05
Sign off
Quantities are priced with your rates, revisions are compared, and the final list is sealed with its history.
Stacked in order. Each layer builds on the one below.
01
Shop profile
Your fronts, gaps, drawer banks, fillers and carcass construction, set up once and used on every job.
02
Reading
Cabinets, panels, fillers, kickers, bulkheads and appliances, each tied to the sheet and elevation it came from.
03
Questions
The finishes, hardware and site details the plans leave out, asked as one-tap choices instead of long emails.
04
Sign-off
Quantities with your own rates, a revision-by-revision history and a sealed sign-off for every job.
Your clients’ plans, handled with care.
Reading
Read by AI
Plans are read by AI. That reading is the starting point, never the final word.
Checking
Checked in your browser
Sealed
Sealed sign-off
Each sign-off is sealed and kept in the job’s history, so you can see what was signed and when.
Builders
Builder links that expire
Builders answer through a one-off link with no sign-in. Questions and plan snippets are encrypted on your computer, and deleted once the builder answers.
About TakeOff.
No. If you can open a PDF and tick a box, you can use TakeOff.
It starts from a common shop setup, and we build a profile for your shop from your own construction rules.
Send the builder a secure link: they answer on their phone, no sign-in, and the answers drop straight into TakeOff. Or print the questions sheet PDF.
Not yet. TakeOff produces the signed-off cabinet list. 3D models and shop drawings built from that list are later parts of CabinetryOS.
Load the new revision and TakeOff shows what was added, removed or resized since the last one.
Try it on your next job.
Early access is free while we test TakeOff with working shops.